Eagle Materials Inc's Suppliers Performance

Gypsum Wallboard. We mine and extract natural gypsum rock, the principal raw material used in the manufacture of gypsum wallboard, from mines and quarries owned, leased or subject to mining claims owned by the Company and located near our plants. Certain of our New Mexico reserves are under lease with the Pueblo of Zia. Gypsum ore reserves at the Gypsum, Colorado plant are contained within a total of 115 placer claims encompassing 2,300 acres. Included in this are 94 unpatented mining claims where mineral rights can be developed upon completion of permitting requirements. We currently own land containing gypsum in the area of Duke, Oklahoma, with additional reserves controlled through a lease agreement. Other gypsum deposits are located near the plant in Duke, which we believe may be obtained at reasonable cost when needed. We are currently in the eighth year of a sixty year supply agreement (original twenty year term with two twenty year extension options) with a public utility in South Carolina for synthetic gypsum, which we use at our Georgetown, South Carolina plant. If the utility is unable to generate the agreed-upon amount of gypsum, it is responsible for providing gypsum from a third party to fulfill its obligations.

Through our modern low cost paperboard mill we manufacture sufficient quantities of paper necessary for our gypsum wallboard production. Paper is a significant cost component in the manufacture of gypsum wallboard, currently representing approximately one-third of our cost of production.

Our gypsum wallboard manufacturing operations use natural gas and electrical power. A significant portion of the Company’s natural gas requirements for our gypsum wallboard plants are currently provided by three gas producers under gas supply agreements expiring in May 2017 for New Mexico; March 2017 for Colorado; and October 2016 for South Carolina and Oklahoma. If the agreements are not renewed, we anticipate being able to obtain our gas supplies from other suppliers at competitive prices. Electrical power is supplied to our New Mexico plants at standard industrial rates by a local utility. Our Albuquerque plant utilizes an interruptible power supply agreement, which may expose it to some production interruptions during periods of power curtailment. Power for our Gypsum, Colorado facility is generated at the facility by a cogeneration power plant that we own. Currently, the cogeneration power facility supplies power and waste hot gases for drying to the gypsum wallboard plant. We do not sell any power to third parties. Gas costs represented approximately 7% of our production costs in fiscal 2016.
Recycled Paperboard. The principal raw materials are recycled paper fiber (recovered waste paper), water and specialty paper chemicals. The largest waste paper source used by the operation is old cardboard containers (known as OCC). A blend of high grades (white papers consisting of ink-free papers such as news blank and unprinted papers) is used in the gypsum liner facing paper, white top linerboard and white bag liner grades.


We believe that an adequate supply of OCC recycled fiber will continue to be available from sources located within a reasonable proximity of the paper mill. Although we have the capability to receive rail shipments, the vast majority of the recycled fiber purchased is delivered via truck. Prices are subject to market fluctuations based on generation of material (supply), demand and the presence of the export market. Current gypsum liner customer contracts include price escalators that partially offset/compensate for changes in raw material fiber prices. The chemicals used in the paper making operation, including size, retention aids, biocides and bacteria controls, are readily available from several manufacturers at competitive prices.

The manufacture of recycled paperboard involves the use of large volumes of water in the production process. We have an agreement with the City of Lawton municipal services for supply of water to Republic. Electricity, natural gas and other utilities are available to us at either contracted rates or standard industrial rates in adequate supplies. These utilities are subject to standard industrial curtailment provisions.

Cement and Slag. The principal raw material used in the production of Portland cement is calcium carbonate in the form of limestone. Limestone is obtained principally through mining and extraction operations conducted at quarries that we own or lease and are located in close proximity to our plants. We believe that the estimated recoverable limestone reserves owned or leased by us will permit each of our plants to operate at our present production capacity for at least 30 years. Other raw materials used in substantially smaller quantities than limestone are sand, clay, iron ore and gypsum. These materials are readily available and can either be obtained from Company-owned or leased reserves or purchased from outside suppliers.

We have a long term supply agreement with a steel manufacturer to supply granules necessary for the grinding of slag. This agreement allows for the purchases of 550,000 tons per year.

Electric power is also a major cost component in the manufacturing process for both cement and slag, and we have sought to diminish overall power costs by adopting interruptible power supply agreements at certain locations. These agreements may expose us to some production interruptions during periods of power curtailment.

Gypsum Wallboard. We mine and extract natural gypsum rock, the principal raw material used in the manufacture of gypsum wallboard, from mines and quarries owned, leased or subject to mining claims owned by the Company and located near our plants. Certain of our New Mexico reserves are under lease with the Pueblo of Zia. Gypsum ore reserves at the Gypsum, Colorado plant are contained within a total of 115 placer claims encompassing 2,300 acres. Included in this are 94 unpatented mining claims where mineral rights can be developed upon completion of permitting requirements. We currently own land containing gypsum in the area of Duke, Oklahoma, with additional reserves controlled through a lease agreement. Other gypsum deposits are located near the plant in Duke, which we believe may be obtained at reasonable cost when needed. We are currently in the eighth year of a sixty year supply agreement (original twenty year term with two twenty year extension options) with a public utility in South Carolina for synthetic gypsum, which we use at our Georgetown, South Carolina plant. If the utility is unable to generate the agreed-upon amount of gypsum, it is responsible for providing gypsum from a third party to fulfill its obligations.

Through our modern low cost paperboard mill we manufacture sufficient quantities of paper necessary for our gypsum wallboard production. Paper is a significant cost component in the manufacture of gypsum wallboard, currently representing approximately one-third of our cost of production.

Our gypsum wallboard manufacturing operations use natural gas and electrical power. A significant portion of the Company’s natural gas requirements for our gypsum wallboard plants are currently provided by three gas producers under gas supply agreements expiring in May 2017 for New Mexico; March 2017 for Colorado; and October 2016 for South Carolina and Oklahoma. If the agreements are not renewed, we anticipate being able to obtain our gas supplies from other suppliers at competitive prices. Electrical power is supplied to our New Mexico plants at standard industrial rates by a local utility. Our Albuquerque plant utilizes an interruptible power supply agreement, which may expose it to some production interruptions during periods of power curtailment. Power for our Gypsum, Colorado facility is generated at the facility by a cogeneration power plant that we own. Currently, the cogeneration power facility supplies power and waste hot gases for drying to the gypsum wallboard plant. We do not sell any power to third parties. Gas costs represented approximately 7% of our production costs in fiscal 2016.
Recycled Paperboard. The principal raw materials are recycled paper fiber (recovered waste paper), water and specialty paper chemicals. The largest waste paper source used by the operation is old cardboard containers (known as OCC). A blend of high grades (white papers consisting of ink-free papers such as news blank and unprinted papers) is used in the gypsum liner facing paper, white top linerboard and white bag liner grades.


We believe that an adequate supply of OCC recycled fiber will continue to be available from sources located within a reasonable proximity of the paper mill. Although we have the capability to receive rail shipments, the vast majority of the recycled fiber purchased is delivered via truck. Prices are subject to market fluctuations based on generation of material (supply), demand and the presence of the export market. Current gypsum liner customer contracts include price escalators that partially offset/compensate for changes in raw material fiber prices. The chemicals used in the paper making operation, including size, retention aids, biocides and bacteria controls, are readily available from several manufacturers at competitive prices.

The manufacture of recycled paperboard involves the use of large volumes of water in the production process. We have an agreement with the City of Lawton municipal services for supply of water to Republic. Electricity, natural gas and other utilities are available to us at either contracted rates or standard industrial rates in adequate supplies. These utilities are subject to standard industrial curtailment provisions.

Cement and Slag. The principal raw material used in the production of Portland cement is calcium carbonate in the form of limestone. Limestone is obtained principally through mining and extraction operations conducted at quarries that we own or lease and are located in close proximity to our plants. We believe that the estimated recoverable limestone reserves owned or leased by us will permit each of our plants to operate at our present production capacity for at least 30 years. Other raw materials used in substantially smaller quantities than limestone are sand, clay, iron ore and gypsum. These materials are readily available and can either be obtained from Company-owned or leased reserves or purchased from outside suppliers.

We have a long term supply agreement with a steel manufacturer to supply granules necessary for the grinding of slag. This agreement allows for the purchases of 550,000 tons per year.

Electric power is also a major cost component in the manufacturing process for both cement and slag, and we have sought to diminish overall power costs by adopting interruptible power supply agreements at certain locations. These agreements may expose us to some production interruptions during periods of power curtailment.