It Tech Packaging Inc

We engage in production and distribution of four categories of paper products: corrugating medium paper, offset printing paper, digital photo paper and tissue paper products.

Our principal executive offices are located at Science Park, Juli Road, Xushui District, Baoding City, Hebei Province, People’s Republic of China. Our telephone number is (86) 312-869-8215. Our website is located at http://www.orientpaperinc.com

Corrugating Medium Paper and Offset Printing Paper

Our current products (excluding digital photo paper and tissue paper products) generally undergo two stages of manufacturing: (1) creating pulp from recycled paper products, and (2) treating the pulp and molding it into the desired types of paper products. A brief overview of the pulp and papermaking process is provided below.

Pulping

The recycled waste paper is first sorted by machine, and then broken down and beaten or smashed into small pieces using water and mechanical energy. It is then put through a course screening drum, followed by a fine screening drum to separate different grades of pulp, a process that we refer as “concentration”. In order to purify the pulp further, an approach flow system is used to filter out any impurities or inconsistencies, such as sand, in the pulp.

Paper Making

The pulp is sieved to remove the excess water and molded into a specific size. The moisture content is further reduced by applying hydraulic pressure to the pulp. The pulp then enters the drying section where it is rolled over by heated cylinders. The dried paper is then coated with a mixture of clay, white pigment and binder to produce a surface on which ink can sit without being fully absorbed, enabling crisper, more consistent print quality.

The paper goes through a process called calendaring, which flattens and smoothens the paper into long sheets. The paper is then wound onto a reel that is mounted in a roll-slitting machine for rewinding, during which cutters are used to cut the paper into the desired widths. Upon completion, the rolls are fitted with sleeves and labeled, and then sent to quality control before shipment or storage.

Digital Photo Paper

The manufacturing process for digital photo paper involves multiple steps of coating, drying and calendaring. The major raw material, digital photo base paper, is loaded into the main production line for (1) coating, (2) drying, (3) calendaring, (4) recoating, (5) drying and (6) reeling for finished products. We make both glossy and semi-matt digital photo paper. Our digital photo paper is primarily made in sheets of sizes from A3 to A6 and 3R to 5R, and can be further cut into customer-specified sizes by our specialty cutting machine before shipment.

Base Tissue Paper

While we make tissue paper products, we currently do not manufacture base tissue paper.